berger
Well-known member
I finally got around to bleeding my lockers today, and I got to use a tool I picked up a couple of months ago...a Motive Power Bleeder. Awesome tool! Since the Pinz uses DOT 3 for the three lockers, brakes and clutch, this tool is invaluable, especially when working alone. This version came with the reservoir cap that simply screws on to European style reservoirs...45MM.
I first had to pressurize the bleeder to 10psi to make sure it held pressure and there were no air leaks...
I first had to pressurize the bleeder to 10psi to make sure it held pressure and there were no air leaks...