Landcruiser semi floating rear axles and axle ends.

[Badweld]

I bought a mid 80s landcruiser rear axle to use for my fj80 hybrids. Im selling the axle shafts I didn't use, as well as the housing ends with the bearings in them.
They are semi floating and have c-clips. THEY ARE HUGE. At the outer bearings, the shaft measures 1.75".
27 spline, so they fit Toyota centers, 6 bolt (toy wheels).
Would make a killer rear axle set up (with disc brakes).
$150 obo.

 

[junkpile]

Ok I'm curious, C-clips would require a housing with a removable diff cover, what do you suggest using other than a mid 80's cruiser housing. Do the c-clip style axle gears fit into a traditional 8" carrier? What are the axle lengths?

 

[Badweld]

I think a large fill hole/inspection hole would suffice. Any housing would work (Tacoma eg) as long as the splines fit the side gears. I used an 80s 9.5" ring gear third, and put in the front. I then used stock style (rcv) fj80 axles and birfs. These fit into a 8' high pinion third. So I believe any toy 8" would work with these. I can measure the axle lengths tonight.