Identify this TRE

bradleyfitz

Well-known member
Club Member
I need to replace the drag link end on my aftermarket steering for the TJ and I'm having a hard time identifying this drag link end:

17mm shank. Thread length is approx. 2 1/4" long.

tre..jpg

Anyone?
 
K

kbrousseau

Guest
Brad...can you give me some more measurements. If you can measure the overall length from the end off the threads to the center of the stud, and the thread size on the stud if possible and the length of the taper on the stud and I should be able to come up with something for you.

Also Brad what is the thread? right hand or left hand?

:beer:
 
Last edited:

bradleyfitz

Well-known member
Club Member
Brad...can you give me some more measurements. If you can measure the overall length from the end off the threads to the center of the stud, and the thread size on the stud if possible and the length of the taper on the stud and I should be able to come up with something for you.

Also Brad what is the thread? right hand or left hand?

:beer:

Left hand thread.
End of threads to center of stud: approx 80mm (3.15")
Width of wide taper: 16mm (0.62")
Width of narrow taper: 14mm (0.55")
Length of taper: 26mm (1.02")
Length of stud: 43mm (1.69")
Width of threads on stud: 17mm (0.66")

I do not know the thread pitch.
 
Last edited:
Top