dana 44 pass. side flat top knuckle
dana 44 pass. side flat top knuckle to fit on a 78 jeep fsj dana 44.
with high steer arm.
dana 44 pass. side flat top knuckle to fit on a 78 jeep fsj dana 44.
with high steer arm.
|
|
|
dana 44 pass. side flat top knuckle
- Thread starter badcompany
- Start date
You and me both. According to Mr N's page http://77cj.littlekeylime.com/flatop_knucles.html it is 73-76.5 Chev or 74-76 FSJ. Now I know that you can buy brand new ones from Spicer as one of East Coast Gear's employees had one, they have the bosses just need to be milled and tapped and all that info is online. He actually had both sides that way. I just don't want to call back and ask for the part number and not buy their aftermarket one. See if you can find that part number through your connections possibly?
Dwayne
Dwayne
thanks i have some leads around hear ill see if they pan out.
i thought you were spring over and if so what are you doing for steering.
what ever it is its working awsome.
i thought you were spring over and if so what are you doing for steering.
what ever it is its working awsome.
I am 3-link and coils. You have leads on used ones or the actual spicer one?
dj
dj
How's about this one:
http://cgi.ebay.com/ebaymotors/Dana...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/Dana...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Hmmm...not real cheap and he doesn't show a picture of the underside of the "flat-top" area to see if there are any bosses. Lots of guys on Ebay claim flat top but are ill-informed or just liars. Thanks for the info though Mitko I may quiz him more.
Dwayne
if you can wait till the middle or end of october i should have a set for you.