Cherokee HP Dana 30 front Axle

[Daeo]

Hello, looking for a mostly complete Dana 30 front axle for my Cherokee. Bent my lower control arm brackets so I want to build a new axle up and just swap it in. doesn't need to have much but I would prefer it has the ring and pinion installed, I believe I have 3.55 gearing.

Thanks
Danny

 

[2Greys]

Good luck! <Redacted as it is BS> There is like 3 at the Kenney U-Pull off of Hunt Club but the weather isn't that conducive. Gatineau may have more. I think you would have better luck just replacing the bracket for now and then look next spring.

 

[dwcjwerfner]

Actually Chris regular AW4 auto Cherokees are 3.55

And Danny if there is nothing else wrong with your axles just cut off the old brackets and weld these on
http://www.tmrcustoms.com/store/index.php?main_page=product_info&cPath=211_215&products_id=1159
I got a set for Connie's Rubi, they are nice and strong

 

[2Greys]

I stand corrected. I completely forgot about the automatics Ignore me I know nothing.

 

[Daeo]

Thanks dwcjwerfner! Are they easy to install? i.e. locate. The bracket on the frame is slightly bent on that same side too but I was thinking of getting bolt on drop brackets for the frame side.

 

[dwcjwerfner]

No, just make sure to measure before you cut them off. I eyeballed them and ended up having them over a bit to far and it is a pain in the ass to put the shock bolts on now, but you don't do that everyday. The frame mount drop brackets will strengthen up your old brackets a bit, just make sure they are squared up before doing it.