LF: Items to finish the TJ project

[O.D.]

Here's what i am missing/still needing at some point to complete:

• Gas Tank Skid Plate. I tried to recycle the existing one on the weekend however it is pretty much done. Looking for either a Warn or Kilby OR a home brew one that is solid.
• Rear Driveshaft to accomodate a 4.5" lift and SYE in place. Anyone once have this in place and then went gusto with LA's or HD axles? Let me know.
• Still looking for In/Out lines for the heater core. I have 2 sets and both I cannot...

Please login to view full content. Log in or register now.

 

[bradleyfitz]

Anyone know where i could get my hands on alternative hosing? The OE hoses are pre-"Bent" to fit around the head cover, so whatever i replace it with, i am thinking it will need to be quite mallable.

Ebay. $10 for the long, $10 for the short.

http://cgi.ebay.com/ebaymotors/2000-Jeep-TJ-Wrangler-Sahara-Short-Heater-Core-Hose_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem334de23b8dQQitemZ220350004109QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/2000-Jeep-TJ-Wrangler-Sahara-Long-Heater-Core-Hose_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQhashZitem334de23b28QQitemZ220350004008QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[Baja]

http://www.jeepkings.ca/forums/showthread.php?t=92099

there is a gastank skid. Its in Kingston which isnt too far of a drive

 

[O.D.]

Ebay. $10 for the long, $10 for the short.

http://cgi.ebay.com/ebaymotors/2000...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

http://cgi.ebay.com/ebaymotors/2000...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Thanks Brad. I'll take a look on Feebay, however am certain that 4.0L lines will not work for a 2.5L due to the length and bends.

http://www.jeepkings.ca/forums/showthread.php?t=92099
there is a gastank skid. Its in Kingston which isnt too far of a drive

Yeah, this one is tentatively sold already. I got in just before Matt and PM'd directly. Missed this one by about 4 hours. By the time I did this, it was pretty much sold. Darn nice weather on Monday Thanks for the head's up nonetheless.

 

[bradleyfitz]

Thanks Brad. I'll take a look on Feebay, however am certain that 4.0L lines will not work for a 2.5L due to the length and bends.

My bad, forgot you had the 2.5. S'all good, ebay to the rescue for $18.

http://cgi.ebay.com/ebaymotors/Jeep-Wrangler-TJ-OEM-2-5L-4-cyl-Heater-Hoses-97-02_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3c9d42dd05QQitemZ260336442629QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

And my buddy Alex said to try Benson's. $50 range for new hoses.

 

[chunkytrunks]

Thanks Brad. I'll take a look on Feebay, however am certain that 4.0L lines will not work for a 2.5L due to the length and bends.



Yeah, this one is tentatively sold already. I got in just before Matt and PM'd directly. Missed this one by about 4 hours. By the time I did this, it was pretty much sold. Darn nice weather on Monday Thanks for the head's up nonetheless.

:banghead::banghead::banghead: I was so close :flipoff:

:beer::beer:

 

[O.D.]

Hey at least you have one in place!! Right now, this skid plate is really holding me back. If something does not happen in the next few days, i am going to have to bite the bullet and buy one new from the States....

Mucho pricey though

:banghead::banghead::banghead: I was so close :flipoff:

:beer::beer:

 

[chunkytrunks]

Hey at least you have one in place!! Right now, this skid plate is really holding me back. If something does not happen in the next few days, i am going to have to bite the bullet and buy one new from the States....

Mucho pricey though

Yes, very pricey. You find some straps also?

 

[O.D.]

I had 4 to work with (My existing and the 2 i got off that arse in Windsor). I sandblasted them down pretty good on Monday and out of the 4, i have 2 that should work. Just coating them with primer right now and then will coat them with some POR15. They should do the trick....

 

[chunkytrunks]

I had 4 to work with (My existing and the 2 i got off that arse in Windsor). I sandblasted them down pretty good on Monday and out of the 4, i have 2 that should work. Just coating them with primer right now and then will coat them with some POR15. They should do the trick....

Yeah, they should be fine. They aren't under a whole lot of stress.
:beer: