LF: Stock pitman arm... TJ / XJ, etc....

[O.D.]

Dwayne... You happen to have a spare pitman arm kicking around? It seems that most of the jeeps in the '97-'05 date range have interchangeable pitman arms.. I would like to revert back to a stock setup to see if it would address the bump steer...

Anyone?

 

[dwcjwerfner]

Yeah I have some and I think I might even have a few that I haven't drilled out lol. But mine will all be be pre '91 that is why I never mentioned anything I was not sure what crossed over but you are welcome to try one.

Dwayne

 

[O.D.]

It's worth a shot..

I would still need to ream out the end to accomodate my 1T TRE's but i wonder if the splines on the other end are the same.....

You in town anytime soon

 

[Twinkie]

I will be up Dwayne's way this weelend most likely. I could swing in and grab it if that helps.

 

[dwcjwerfner]

Hmmm......that means I would have to pull it off a box, my favorite job .....

dj

 

[O.D.]

Dwayne, if it's still set up, no worries... I'll keep looking around. If it is off and Terry, you are around and could swing by that would be great...

 

[dwcjwerfner]

Tim if you could verify that it is the actually same spline count on both I don't mind pulling one off.

dj

 

[O.D.]

Thanks Dwayne. I threw up a post on JK as well and so far all responses indicate that they are interchangeable. The only variance is the degree of drop:

http://www.jeepkings.ca/forums/showthread.php?108090-Pitman-arms-Are-they-interchangeable&p=1119180

 

[dwcjwerfner]

Hey Tim
I have one "virgin" pitman arm pulled. If this helps your issue and you don't want your drop pitman arm I would consider it as trade.

Dwayne

 

[Twinkie]

I can pick it up tomorrow, let me know.

Sent from my HTC Magic using Tapatalk

 

[dwcjwerfner]

Sure Terry I am here most of the day Sunday and if not I will leave it outside the garage door.

Dwayne

 

[Twinkie]

10-4. Probably be someone late afternoon.

Sent from my HTC Magic using Tapatalk

 

[O.D.]

Sorry guys.... Fawkin' internet's been down here for most of the weekend.....

Dwayne, i can get a stock pitman arm from most shops for about $20.00 and change. This drop one is about $50+ if i recall from Claytons... PLUS, i had it reamed out for 1T TRE's...... So, don't know if it would work for you...

 

[Twinkie]

i have the pitman arm...