WTB: Toyota SFA steering setup

[Logan]

Looking for a friend. He has a sfa with the ifs steering. Needless to say, it keeps braking. So im looking for whatever I need to convert it. So im guessing power steering box, pitman arm, tie rod to pitman, and the link/tie rod to right knuckle. If anyone has this please let me know how much for it all.

 

[szabotage]

are you talking about donny's spring under 4runner? I doubt the IFS box is the problem since it is a vast improvement over the old push pull box he wants to swap in. this is what he needs: http://trailgear.ca/default.cfm?fa=products&ProdCategoryID=179

 

[Logan]

The problem is that the ifs steering setup is jimmy rigged to work on the sfa. So the ccenterlink, pitman, idler ,and ifs tie rods are being used, with some weird "Z" home made contraption to link it all together. I he can use his stock box, the we just need everything else.

 

[szabotage]

here's what he needs to do:

remove the idler arm
remove all the tie rods and drag links n crap
remove the pitman arm off the IFS box
remove the lo steer knuckles off the axle
buy the above steering setup I linked in my previous post
install them.


there's no reason the idler arm should be used in a SFA setup. at the same time (assuming this is donny's 4runner) he should get rid of the SPUA. no offence but it looks hack.