|
|
|
Need to borrow a 1 5/16" socket
- Thread starter 2Greys
- Start date
M
Morley
Guest
I can hook you up, but its a little ways out of ottawa.
Limoges area.
buying the socket at Princess auto is probably cheaper than your gas to come out here at these rates
9
98JeepXJ
Guest
I have the socket in metric 34mm deep impact socket.
let me know if that can work for you. usually works for me.
let me know if that can work for you. usually works for me.
I can hook you up, but its a little ways out of ottawa.
Limoges area.
buying the socket at Princess auto is probably cheaper than your gas to come out here at these rates
LOL I am on the other side of the city. Chances are I could buy one for less. Thanks though!
What I really need to do is just get the pitman arm snugged up higher on the box. Looking at pictures on the intertubes, it looks like it is up high enough. I am sure it is drivable. If possible, could I pop by with the Jeep and my torque wrench and geterdone there assuming you are available tonight and relatively close by to the Ikea in Ottawa? I figure it should be less than 5 minutes of work but as I told Brad last night, I think there is a temporal distortion field around my Jeep as time seems to fly when you are working on it. If this is ok, send me a PM. I may also be able to get one from the place I got my steering box from, if so, I will probably do it in the parking lot. Will let you know.
Last edited: