Suspension tabs

[Mlorint]

CNC plasma cut tabs, gussets and what ever.

15" Beadlock rings 1/4" - full set 8 rings - no hardware $250
1.5" tube shock mounts 3/16" Each - $30
3" X 3" 3/16" gusset - pair - $3
3 hole upper link mount 1/4" Each - $20
Lower link and shock mount 1/4" each - $30
Hydro ram mount 1/4" $50
Ford 9" and 14 Bolt pinion guard 1/4" Each - $50

613-447-3928
Email - mlorint@hotmail.com
Or PM

 

[mucovich]

Very cool! Have fun at KOH!

 

[Baja]

Sweet, when i get to that stage in my build you will definatly be getting a pm.

 

[Twinkie]

Yah, if these will help my builder in early spring/late winter with my build, then we'll be talking too...

 

[Logan]

Sweet! Ill definatly need some in a few months!

 

[chunkytrunks]

How about a 4 link plate for my new RC Crawler?

One like this.

http://www.axialracing.com/ftp/press_img/chassis/bc_4link_hires.jpg

 

[mucovich]

This is great news Mike, I think I've got all my brackets (just finished welding the last of them today) but I've been helping a buddy truggy an old blazer and he's gonna need a whole lot of brackets either this spring or this fall when we get back from an overseas deployment.

 

[Farm Boy]

How about a 4 link plate for my new RC Crawler?

One like this.

http://www.axialracing.com/ftp/press_img/chassis/bc_4link_hires.jpg

If you can get him the cad file.........

 

[chunkytrunks]

If you can get him the cad file.........

LOL! I tried to see if somone put it up online but couldn't find it. I was just gunna make a simple one myself. Not worth spending the $20 + shipping when i can make it for $1 and about 10mins of my time.
Just thought it would be cool if he could.
:beer:

 

[Mlorint]

Easy to draw but a little small for the plasma.

 

[Mlorint]

It's call torchmate cad. It seems easy to use. But I can use any Cad program just need to export to dxf

 

[bradleyfitz]

Mike, I need some tabs for seat mounting and harness mounting.

Flat tabs x 8:
3/16" thickness
1 1/2" wide
1 3/4" from bottom to center of hole
1/2" hole

Chassis tab for 1 3/4" tube x 16
3/16" thickness
1 3/4" from center radius to center of hole
1/2" hole

Chassis tab for 1 3/4" tube x 8
3/16" thickness
1 3/4" from center radius to center of hole
3/8" hole

Chassis tab for 1 3/4" tube x 4
3/16" thickness
2 3/4" from center radius to center of hole
3/8" hole

Chassis tab for 1 3/4" tube x 4
3/16" thickness
3 3/4" from center radius to center of hole
3/8" hole

Chassis tab for 1 3/4" tube x 4
3/16" thickness
4 3/4" from center radius to center of hole
3/8" hole

Thnx,
Brad.

 

[Mlorint]

I am now up and running. Gussets / Tabs starting at $3,

 

[Mlorint]

15" Beadlock rings 1/4" - full set 8 rings - no design/hardware $225
Dana 60 Diff ring 1/4" Each - $40
Dana 30 Diff ring 1/4" Each - $40
Ford 8.8" Diff ring 1/4" Each - $40
1.5" tube shock mounts 3/16" Each - $30
3" X 3" 3/16" gusset Each - $3
3 hole upper link mount 1/4" Each - $30
Lower link and shock mount 1/4" Each - $30
Hydro ram mount 1/4" $50
Ford 9" and 14 Bolt pinion guard 1/4" Each - $50

613-447-3928
Email - mlorint@hotmail.com

 

[O.D.]

Hopefully i will get everything measured up today and will send the info. I'll need:

- 8 tabs for the seats
- 6 tabs for the front harnesses
- 6-10 tabs for the rear harnesses

Will let you know.

 

[Mlorint]

Sounds good

 

[Mlorint]

Not a problem to cut, don't have any on hand. I normally use lucon

 

[O.D.]

Hey Mike,

OK, for now:

Tabs for the front seats, for 1 1/2" tube, 3/8" Bolt Holes

4 - 4 3/4" in length from the center of the bolt hole to the center of the inside arch of tab where it welds to the tube.
4 - 3" in length from the center of the bolt hole to the center of the inside arch of tab where it welds to the tube.

I am thinking 3/16" for thickness???

Let me know. PM or give me a call 826-1007. I can come and pick them up whenever. I'll also need a bunch for harnesses but i'll need to get the bolt hole sizes...

 

[Mlorint]

Hydro ram mount

3 Hole upper link mount

3" 90* Gusset

Lower link mount with shock mount

Ford 9" pinion Guard

 

[Mlorint]

15" Beadlock



Width of a quarter cut in 1/4"