|
|
|
89 samurai build
- Thread starter MOX
- Start date
Looking good Chris! Almost there!
Thanks!
I'm going to cut it off leaving just enough frame for a bumper with a receiver for a winch and a place to tie in a roll cage.
Now it has worn out 32's , super swampers ... Im running those for 2014, I don't think my axles will handle much more plus it's not geared yet.
Next big purchases would be:
-winch
-axle gears
-transfer case gears
-cage material
Not in that order, when ever deals pop up.
Kind of a test plus update...took pic with iPad then adding to ovo forum rather than downloading pics from phone onto PC.
Pic looks grainy compared to my phone, but you can see I removed the floor section from the rear frame rails and patched a huge hole that was infront of the rear wheel.
back bumper
drilled through the frame, welded in a sleeve for 3/8 bolts, 45'd a piece of angle for clearance then notched the back wall to fit a 2" receiver I got at princess auto ($17 right now)
going to bolt and weld receiver in place, also weld frame rails to inside bumper.
drilled through the frame, welded in a sleeve for 3/8 bolts, 45'd a piece of angle for clearance then notched the back wall to fit a 2" receiver I got at princess auto ($17 right now)
going to bolt and weld receiver in place, also weld frame rails to inside bumper.
thanks to the guys at NO LIMITS for having a 20" piece of brake lines with metric fittings, fit perfect!
bad news is I blew another line while bleeding the system, along the frame to the rear flex lines....... burger do you guys have two 30" pieces with the metric M10 fittings, flared fittings?....I am going to replace both
bad news is I blew another line while bleeding the system, along the frame to the rear flex lines....... burger do you guys have two 30" pieces with the metric M10 fittings, flared fittings?....I am going to replace both
nice! I was going to come over tonight but stayed at work too long, ill be there tomorrow or Wednesday, can you save me two?
= should be here next week, I should be running by the end of the month!!!!!!!