89 samurai build

MOX

Well-known member
Club Member
friends son wrecked his car = new seats!
sami seats.jpgsamiseats.jpg
in all my boxes of parts no transfer case mounts!.... thanks buster for the "custom"" mount :beer:
transfe.jpg
 

MOX

Well-known member
Club Member
I don't think I have posted any pics from the trail...this is all I could find
crag lake lunch spot
crag lake.jpg
sand pile, spring fever 2014
sand pile.jpg
 

MOX

Well-known member
Club Member
thanks to denis I got a donor axle with 5.13 ring and pinion gears! I also have a line on a set for the second axle, cheers buster :beer:
axle.jpg
 

MOX

Well-known member
Club Member
a little pumpkin cheese cake and axle gears on the bench!
axle gears.jpg
got some spots for underneath
night lite.jpg
fixed temp sensor
temp sensor.jpg
 

MOX

Well-known member
Club Member
I didn't like how the back end turned out last year after bobbing the12" of body and 8" off the frame so I cut it off before xmas to clean it up.
i decided to narrow the bed 4" on either side, still need to finish the back, narrow my bumper and relocate tail lights but here is where im at today.
top left.JPGtop view.JPGright side.JPG
 

MOX

Well-known member
Club Member
brother inlaw found some sheet metal in the back of his shed, just big enough to close in the rear end. the budget build continues!

narrowed1.JPGnarrowed2.JPG
 

MOX

Well-known member
Club Member
picked up a good windshield frame, with a wiper motor :D and a hard top! also wider tires with a bigger offset rim but havn't tried them yet.
going to straiten out the body along the sides to line up with the hard top and leave the rear section for a spare.
IMG_1318.JPGIMG_1319.JPG
 
Top